Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-09-2026, 09:08 AM   #2
Marshall V. Daut
Senior Member
 
Join Date: Apr 2011
Location: Davenport, Iowa
Posts: 2,891
Default Re: Speedo cable noise...

I have always used white lithium grease on the speedo cable. It doesn't clump up and harden like chassis or bearing grease. It sounds as though your cable is due for some lube! Put a glob in your hand and pull the bare cable through the grease a couple of times. Then slide it back into the housing and connect to the speedometer and drive gear on the torque tube.
Marshall
Marshall V. Daut is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:50 PM.