exhaust manifold flange to exhaust pipe

[Graeme / New Zealand]

For a stock system (C59 or 59AB) should you use an exhaust sealer at the flange in conjunction with the diamond shaped gasket?

thanks
GB

[Brian]

you know Graeme, I hate silicon anywhere in an engine.... However, I use that red, hi-temp silicon on exhaust systems.

[danliveshere]

Graeme especially if 1 or both sides have any deterioration in the flange faces. I even just bought a tube of the red hi temp exhaust sealer yesterday to repair my modern Ute.

[Graeme / New Zealand]

Originally Posted by Brian

you know Graeme, I hate silicon anywhere in an engine.... However, I use that red, hi-temp silicon on exhaust systems.

Thanks for security I'll use a sealer.

GB

[Graeme / New Zealand]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by danliveshere

Graeme especially if 1 or both sides have any deterioration in the flange faces. I even just bought a tube of the red hi temp exhaust sealer yesterday to repair my modern Ute.

Thanks. I'll make a trip to super Cheap. Is that the JB red sealer that is up on their site

GB