|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
|
|
#11 |
|
Senior Member
Join Date: May 2010
Location: middle of Iowa
Posts: 1,001
|
Never pull the lock pins through with a nut, as you have found out. Most common reason they don’t fit right is the kingpin is not rotated correctly and you are hitting the notch in the wrong angle. Or even the wrong height. After double checking the kingpin is located correctly, use a punch to tap the lock pin into the hole.
|
|
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|