Sector bushing removal question

[Jim16A1]

Originally Posted by old ugly

someone mentioned tightening up their 7 tooth. note, there is no adjustment on the 7 tooth box that will tighten it up. the only way to make it right is to start replacing parts.

the 2 tooth is a different story.

Yeah, by “tightening up” I meant that I would be dumping hundreds of dollars into parts and time with the machine shop, just to slap a band-aid on a poorly designed piece of technology. Also, there are some tolerances that can be adjusted via shims and the lash screw, so it technically doesn’t have “no adjustment” it is just a lost cause once things start to wear inside.