First Start - C59A

[glennpm]

Originally Posted by Ziggster

Yeah, still have to break-in the cam, as it was only running for about 5 mins yesterday, but you’re correct, it needs a load on it after the cam-break-in. It will be at least another year before it’s in a drivable state, and where I live (Quebec), it will never be certified for the road. So, the plan was/is to get it on a dyno to load it up for seating the rings.

That 's a good plan with a dyno.
Also curios about why you can't get it road certified in Quebec?

Glenn