parts interchange

[hlhpa]

I am looking for a parts interchange information. What year ring and pinion will fit my 1040 ford rear end? Will all 39 to 44 years fit? I need 9/37 ratio.
Thanks Howard

[deuce lover]

You have a 6 spline pinion so yes 39-48 . You want a 4.11 which is a 9 /37,correct ?

[hlhpa]

Well, I have a 10-spine pinion. I thought that was 39 or newer.

[cas3]

your 1940 should be a 6 spline, but they make a coupler to go from 6 to 10. To stay with your 10, you would need a 35-36 R&P, or put the original coupler back on the drive shaft for 6 spline 37 to 48.

[hlhpa]

I have a 1936 and it is a 6 spine pinion.

[cas3]

Sponsored Links (Register now to hide all advertisements)

A 36, should be a tubular drive shaft with 10 splines. However, after 80+ years no telling what has been changed. You just need to figure out which style you need, and go shopping

[38 coupe]

Do you have a 1936 rear axle or a 1940 rear axle?
Also, are you sure you want another 4.11 ratio rear axle? You will probably prefer 3.78 ratio gears unless you live in very hilly or mountainous area, or never drive over 45 mph.

[Als48]

4.11 gears would be good for an overdrive or mitchell, tho.

Al Hook