The Ford Barn

1930artdeco · 08-29-2025, 01:53 PM

Not an expert at air cleaners for these carbs. BUT, yes you can retro fit them, HOWEVER, if you do I think that you would be best suited to add a filter that sticks up vertically since these carbs can leak fuel and soak the element (I.E. fire hazard). Also, I have heard that you need a rather large element so as not restrict the air flow. Others will chime in with more specs.

As far as changing carbs out, if this carb works for you (speed/power/MPG) then stick with it. If in the future you want more power which is good if you need it in a pinch, you can use a Marvel/Allstate (best of the A and B world) or a Model B carb-will need to enlarge the intake manifold to take full advantage of the carb.

Mike

08-29-2025, 01:53 PM	#11
1930artdeco Senior Member Join Date: May 2010 Location: Lynden, Wa Posts: 3,941	Re: My new 1930 2-dr sedan Not an expert at air cleaners for these carbs. BUT, yes you can retro fit them, HOWEVER, if you do I think that you would be best suited to add a filter that sticks up vertically since these carbs can leak fuel and soak the element (I.E. fire hazard). Also, I have heard that you need a rather large element so as not restrict the air flow. Others will chime in with more specs. As far as changing carbs out, if this carb works for you (speed/power/MPG) then stick with it. If in the future you want more power which is good if you need it in a pinch, you can use a Marvel/Allstate (best of the A and B world) or a Model B carb-will need to enlarge the intake manifold to take full advantage of the carb. Mike __________________ 1930 TownSedan (Briggs) 1957 Country Sedan