Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-08-2025, 05:05 PM   #7
Bob C
Senior Member
 
Join Date: May 2010
Location: So Cal
Posts: 9,599
Default Re: 53 Mercury p/s conversion

Quote:
Originally Posted by ActionYobbo View Post
Use an electric pump from a Volvo and hide it under the fender behind the headlight. You will need to get hoses made to fit the pump and gear so just buy the steering gear not the whole kit.
This is from the instructions.



Exhaust clearance is extremely tight with a Flathead engine. So tight that we cannot recommend this
kit for use with a Flathead engine. We have tried repeatedly to make or find a header or cast iron
manifold that fits well, but truthfully none really exists. The center exhaust port simply could not be in a
worse location to clear this new and slightly larger box. We therefore do NOT RECOMMEND this kit with
a Flathead engine. We have made a kit for a ’67-’76 Volvo 140 series manual steering box, which fits
great, although those steering boxes have become very hard to find.
Bob C is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:46 PM.