Go Back   The Ford Barn > General Discussion > Late V8 (1954+)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-25-2025, 10:07 AM   #2
dmsfrr
Senior Member
 
dmsfrr's Avatar
 
Join Date: Aug 2012
Location: Abq, NM
Posts: 3,725
Default Re: Aftermarket Mechanical Temp Gauge Hookup Location

Yes the CVR for the gauges may be failing or has already failed.


The only(?) drawback to that spot on the water pump is it's the inlet to the engine from the radiator... so it will always indicate 20 or as much as 30 degrees cooler than the coolant temperature in the engine. Even lower / worse if the thermostat happens to stick shut or the radiator is obstructed.

It's not necessarily a 'bad' place to locate the sensor, just something to be aware of.
.

Last edited by dmsfrr; 07-25-2025 at 11:23 AM.
dmsfrr is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:17 AM.