The Ford Barn

AYooperA · 07-16-2025, 03:00 PM

If memory serves there’s a tab extending past that corner with a c’sunk wood screw securing it. The upper upholstery panel hides this fastener.

jeffgies · 07-17-2025, 10:05 PM

You are absolutely correct. I found 2 tabs (welded) at the front end of the frame and a plate that kind of clamps it into place at the rear. Mine is a Canadian car btw. Once removed, pulling downward freed the trim from the car.

Thanks for the input.

Are these pieces as hard to find as people say? I don't have the driver's side trim.

07-16-2025, 03:00 PM	#1
AYooperA Senior Member Join Date: Jan 2020 Location: Upper Peninsula Michigan Posts: 142	Re: Model A tudor window trim removal If memory serves there’s a tab extending past that corner with a c’sunk wood screw securing it. The upper upholstery panel hides this fastener.

07-17-2025, 10:05 PM	#2
jeffgies Junior Member Join Date: Sep 2023 Posts: 4	Re: Model A tudor window trim removal You are absolutely correct. I found 2 tabs (welded) at the front end of the frame and a plate that kind of clamps it into place at the rear. Mine is a Canadian car btw. Once removed, pulling downward freed the trim from the car. Thanks for the input. Are these pieces as hard to find as people say? I don't have the driver's side trim.