Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-01-2025, 10:15 PM   #1
serocontra
Junior Member
 
serocontra's Avatar
 
Join Date: Jun 2025
Location: Close to Seattle
Posts: 18
Default Model A Tool and Parts Starter Kit

I recently got a Model A and while doing some research I'm learning that there are a few specialty tools, gaskets, and parts that one would be smart to buy sooner rather than later.

What would you say is a must for any Model A owner?
__________________
Archeo-Tech Priest of the Cult Mechanicus.
serocontra is offline   Reply With Quote
Old 07-02-2025, 06:30 AM   #2
nkaminar
Senior Member
 
nkaminar's Avatar
 
Join Date: Jan 2012
Location: Western North Carolina
Posts: 5,852
Default Re: Model A Tool and Parts Starter Kit

Points and condensor, tool set, breaker bar and socket to fit lug nuts, multimeter, oil, coolant (50/50), hand crank, tube patch kit or extra tube, jack and 2X6 for under jack, something to block wheels to keep them from moving when changing flat, jumper cables, first air kit, flares, fire extinguisher, flash light, AAA insurance, credit card.

If something breaks that you don't have parts for, add that to your parts box. If you find that you need a special tool, add that too.

Tour with a group so that if you don't have what you need, chances are that someone in the group will have it. Over time you will build up what to carry so that you can strike out on your own.

Start by making short trips in your town or neighborhood. Do a lot of these short trips and then gradually increase the distance.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.

Last edited by nkaminar; 07-02-2025 at 06:47 AM.
nkaminar is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-02-2025, 02:43 PM   #3
2speed
Senior Member
 
Join Date: Apr 2022
Posts: 105
Default Re: Model A Tool and Parts Starter Kit

If you are really going to work on this, everything he said. Basically a "Basic" mechanics tool set. Plus a torque wrench. The head nut wrench obstruction wrench is helpful.


Some sort of gasket maker. Permatex aviation or RTV stuff.


Les Andrew's book.


Electrical tape, spare wire, wire stripper/crimper, terminal ends.


Baling wire.
2speed is offline   Reply With Quote
Old 07-02-2025, 05:16 PM   #4
JayJay
Senior Member
 
Join Date: Jan 2020
Location: SF Bay Area
Posts: 2,104
Default Re: Model A Tool and Parts Starter Kit

I'd suggest a water pump, radiator hoses, fan belt, a starter bendix assembly and bulbs (headight and taillight) in addition to those spares already mentioned. I also carry a camshaft timing gear, a complete engine gasket set, plus gaskets for the sediment bowl, radiator cap and gas cap (experience talking here...). For tools I carry a 3/8" socket set, a set of adjustable wrenches, feeler gauges, some pliers and screwdrivers, a water pump wrench, a Nu-Rex timing tool and a digital VOM. I also carry a container of mechanics hand wipes and a roll of blue paper towels.

There are some new, small, relatively inexpensive battery-powered rechargable air compressors that will make your life oh so much easier. You can top off your tires from the comfort of your hotel parking lot and not have to search out a grungy old service station. Many of them also double as a jump box.

NK has the right idea. Accumulate stuff based upon your experiences, that way you'll know you have it.
__________________
JayJay
San Francisco Bay Area

------------------------
1930 Murray Town Sedan
1931 Briggs S/W Town Sedan

It isn't a defect, it's a feature!
JayJay is offline   Reply With Quote
Old 07-02-2025, 08:36 PM   #5
Chris Haynes
Senior Member
 
Chris Haynes's Avatar
 
Join Date: May 2010
Location: Camarillo, CA and Pine Grove, CA
Posts: 2,962
Default Re: Model A Tool and Parts Starter Kit

AAA Card.
__________________
1921 Runabout
1930 Tudor
Early 1930 AA
Speed costs money. How fast do you want to go?
Chris Haynes is offline   Reply With Quote
Old 07-03-2025, 12:21 PM   #6
stevemclark
Senior Member
 
stevemclark's Avatar
 
Join Date: Oct 2019
Location: Central Shenandoah Valley,Waynesboro,Va.
Posts: 143
Default Re: Model A Tool and Parts Starter Kit

Sponsored Links (Register now to hide all advertisements)
I have used most of these tools in this kit. .https://www.mikes-afordable.com/product/M1010.html
__________________
It's not the destination ,it's the journey .
stevemclark is offline   Reply With Quote
Old 07-05-2025, 09:24 AM   #7
serocontra
Junior Member
 
serocontra's Avatar
 
Join Date: Jun 2025
Location: Close to Seattle
Posts: 18
Default Re: Model A Tool and Parts Starter Kit

thanks all for the good advice and tips.
I'll start getting my kit together.
__________________
Archeo-Tech Priest of the Cult Mechanicus.
serocontra is offline   Reply With Quote
Old 07-05-2025, 10:50 AM   #8
old ugly
Senior Member
 
old ugly's Avatar
 
Join Date: Aug 2021
Location: alberta canada
Posts: 607
Default Re: Model A Tool and Parts Starter Kit

The best three answers here are.
-Les Andrew’s , book one, repair manual. it may seam pricy but get it.
-a AAA card that will tow you car to your home. Check coverage to make sure.
-travel with club members to start. They will help you.
Don’t buy a bunch of stuff that you may never need. Buy it when you need it.
__________________
old ugly

my mom would have told me. "these things are here to test us"
old ugly is offline   Reply With Quote
Old 07-13-2025, 11:46 PM   #9
serocontra
Junior Member
 
serocontra's Avatar
 
Join Date: Jun 2025
Location: Close to Seattle
Posts: 18
Default Re: Model A Tool and Parts Starter Kit

Quote:
Originally Posted by old ugly View Post
Don’t buy a bunch of stuff that you may never need. Buy it when you need it.
i agree, but so far i've owned my car for a month and it hasnt gotten out of the drive way simply because i'm waiting on parts that take weeks to get to me.
I've been just a bit frustrated and impatient.
__________________
Archeo-Tech Priest of the Cult Mechanicus.
serocontra is offline   Reply With Quote
Old 07-14-2025, 03:18 AM   #10
s.e.charles
Senior Member
 
s.e.charles's Avatar
 
Join Date: Apr 2018
Location: northeast coast
Posts: 220
Default Re: Model A Tool and Parts Starter Kit

provided you are not in need when you buy it.
s.e.charles is offline   Reply With Quote
Old 07-14-2025, 12:10 PM   #11
rackops
Senior Member
 
rackops's Avatar
 
Join Date: May 2010
Location: The Great Dismal Swamp
Posts: 393
Default Re: Model A Tool and Parts Starter Kit

I have a AAA Premier card. Yes, I carry some basic tools with me, but I'm not about to change out hoses, a timing gear, or a head gasket while on the road. At that point, call AAA, get a tow, and head home where I have the tools and facilities to do it properly and on my own time. Most of the time, the tow truck drivers are fascinated by the old car, so they're pretty cool to work with.

I can get a tow within 250 miles with my membership...I haven't made it that far away from my home, nor do I plan on it. But...that's me. As they say "your mileage might vary..."
Attached Images
File Type: jpg IMG_4487.jpg (129.3 KB, 19 views)
__________________
Member, MARC
Current owner, 1928 RHD Australian-built Phaeton CA4752 "Felicity" and a 1931 Victoria "Katie"
Former owner, 1929 Phaeton, 1929 Fordor
rackops is offline   Reply With Quote
Old 07-14-2025, 12:19 PM   #12
BButturff
Senior Member
 
BButturff's Avatar
 
Join Date: Oct 2024
Location: The driftless area of SE Minnesota
Posts: 116
Default Re: Model A Tool and Parts Starter Kit

Joining your local Model A club will be very beneficial. Along with the comradery you will have many decades of knowledge and experience in the members. Plus, most clubs have a collection of the most expensive tool you may someday need.
__________________
_______________________
The other Bruce in Minnesota
1931 Model A Closed Cab (Budd) Pickup "Aurora"

Model A Ford Club of America
Lady Slipper A's
BButturff is offline   Reply With Quote
Old 07-16-2025, 06:20 PM   #13
ModelA29
Senior Member
 
ModelA29's Avatar
 
Join Date: Sep 2022
Location: SoCal
Posts: 1,152
Default Re: Model A Tool and Parts Starter Kit

Quote:
Originally Posted by rackops View Post
I have a AAA Premier card. .......I can get a tow within 250 miles with my membership...
When I bought our A it was 200+ miles away. Not wanting to drive it that far I upgraded our AAA plan. My thought was to drive it within the radius and call AAA to deliver it rest of the way. The owner offered to deliver it for fuel cost so I took that option and saved myself the trip all together. 4 axle straps, wheel chocks and one giant tiedown across the frame (glad he didn't cinch that one very tight) it wasn't going anywhere.......
Attached Images
File Type: jpg delivery.jpg (213.3 KB, 16 views)
ModelA29 is offline   Reply With Quote
Old 07-17-2025, 09:30 PM   #14
Clem Clement
Senior Member
 
Clem Clement's Avatar
 
Join Date: May 2010
Location: Fairfax, VA
Posts: 3,532
Default Re: Model A Tool and Parts Starter Kit

Somewhere in my Ford Barn history, Posted a list to carry on trips.
I would add: Every time somebody breaks a part, you add one to your pile in the car.
add the clutch release gismo
Also add an 8X1 glossy of mama and instant beer.
Ever had a generator pulley fail??
Clem Clement is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:47 AM.