|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
Join Date: Aug 2021
Location: alberta canada
Posts: 607
|
![]()
Here is the solution.
There is so little psi at the model a carb which was originally being supplied fuel via gravity that this fuel pump and regulator set up on a remote tank can not be set low enough. The pressure always overpowered the float needle. The solution is to run a return line back to the gas tank with a restricted fitting in it. Now The fuel is constantly bleeding back to the tank reducing the pressure at the carb to minimal. I tried to get a photo but not having any luck loading it. Thanks OU
__________________
old ugly my mom would have told me. "these things are here to test us" |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|