|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
|
|
06-27-2025, 12:13 PM
|
#1 |
|
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 3,394
|
Re: 21A rods set up on a 4" Merc crank
Big end of the rods should measure 2.220. Then measure the diameter of the crank journal then measure the thickness of the bearing at the crown and multiply by two. then with a little arithmetic you’ll find your oil clearance.
|
|
|
|
«
Previous Thread
|
Next Thread
»
Hybrid Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 04:41 PM.