The Ford Barn

hotrodA · 05-21-2025, 09:22 AM

Hi, Tom.
I’ve only had hands on with the sedan, so I can’t speak specifically to the coupe. But it would seem that they are both similar. The different top corner radiuses were the key to turning it once in the door.
My instructions are the result of a lot of trial and error, repetition and frustration. Hopefully they can help. Once I figured the first one out the second one was a snap.

TIP: Measure the distance from the ends of the slotted lift channel to the edge of the glass and duplicate that when you replace the glass in the channel. It’s not equal distant on the sedan, may also be offset on yours.
Bill

05-21-2025, 09:22 AM	#1
hotrodA Senior Member Join Date: May 2010 Location: Rogersville, TN Posts: 834	Re: 32 two door front door glass fitment. How??? Hi, Tom. I’ve only had hands on with the sedan, so I can’t speak specifically to the coupe. But it would seem that they are both similar. The different top corner radiuses were the key to turning it once in the door. My instructions are the result of a lot of trial and error, repetition and frustration. Hopefully they can help. Once I figured the first one out the second one was a snap. TIP: Measure the distance from the ends of the slotted lift channel to the edge of the glass and duplicate that when you replace the glass in the channel. It’s not equal distant on the sedan, may also be offset on yours. Bill