Q:Connecting free flow oil Filter to 59 AB Flathead

[69a]

Originally Posted by Lawrie

you need to heave those push on hose and fittings for sure.
Lawrie

Correct Pushlock hoses and fittings are perfect. I've used them for 40 years on two engines, 80% full flow and 100%. I remember when they first came out and they tested a hose. I can't remember if it was 3/8" or 1/4" but it blew at 600 psi. It burst the hose nowhere near the fittings. Temperature is rubbers biggest enemy, so I do replace the hoses when I've had the engine out.