The Ford Barn

scootermcrad · 07-05-2011, 02:28 PM

!!ALL IS SOLD! This thread can be closed! THANKS EVERYONE!!!

**Editing the ad to show them parted out. Prices are listed accordingly**

Okay! Time for these to move on to someone that can use them.

These doors were from my Fordor project. They are from a 1931 Slant Windshield Deluxe Town sedan. They are actually Briggs doors, but for this model of car they were exactly the same as the Murray, which is apparently more common.

The doors need patch panels which ARE available, but they're solid other than that. All components move freely and are in working condition. Just need to be cleaned up and the regulators will probably need the springs replaced. I wired brushed a few of the items as well as lubricating moving parts to make sure all was in good working order. Everything works as it should. These doors just collected a lot of dirt from sitting outside and of course some surface rust. Everything should clean up though.

I will not ship the doors themselves. I will be more than happy to throw these on a pallet and wrap them up if you will arrange for pickup. Shipping will be up to you though. Just don't have time to do much more than palletize them.

All prices are plus shipping (unless noted) and reasonable offers are welcome.

**NEW PRICES**

Stripped Doors - SOLD
Garnish window moldings - SOLD
Lower garnish moldings - SOLD
Door latches - SOLD - Thanks!
Window regulators and channel - SOLD
door handles and cranks - SOLD

Scott

email: [email protected] or give me a call. 702-845-1874

I will take more pictures if you want them. Nothing to hide here.

scootermcrad · 07-08-2011, 11:29 AM

BTTT

PM, email, or give me a call...

scootermcrad · 07-12-2011, 09:20 AM

BTTT

Make me a reasonable offer. If you only need part of the doors to restore a section I can remove and send just that section/part. I will disassemble these, whatever you guys need. Shipping them as a complete door is just going to be too difficult with my time limitations. I WILL help arrange a pickup or put them on a pallet though.

THANKS!

scootermcrad · 07-15-2011, 09:41 AM

Okay! Going to part these out. Send me an email, PM, or call me with your requests. I would prefer to sell components in pairs. (i.E. latches, regulators, garnish moldings, etc.) Worst case I will sell individual pieces if pairs don't sell.

I will post new pictures in a new thread once the doors are taken apart.

THANKS and BTTT

scootermcrad · 08-01-2011, 12:08 PM

Sponsored Links (Register now to hide all advertisements)

Regulators are still available!

Everything else is sold! Thanks guys!

07-05-2011, 02:28 PM	#1
scootermcrad Junior Member Join Date: Oct 2010 Location: Concord, NC Posts: 29	1931 Slant windshield doors and components - SOLD City: Huntington Beach State: CA Price: in ad !!ALL IS SOLD! This thread can be closed! THANKS EVERYONE!!! Editing the ad to show them parted out. Prices are listed accordingly Okay! Time for these to move on to someone that can use them. These doors were from my Fordor project. They are from a 1931 Slant Windshield Deluxe Town sedan. They are actually Briggs doors, but for this model of car they were exactly the same as the Murray, which is apparently more common. The doors need patch panels which ARE available, but they're solid other than that. All components move freely and are in working condition. Just need to be cleaned up and the regulators will probably need the springs replaced. I wired brushed a few of the items as well as lubricating moving parts to make sure all was in good working order. Everything works as it should. These doors just collected a lot of dirt from sitting outside and of course some surface rust. Everything should clean up though. I will not ship the doors themselves. I will be more than happy to throw these on a pallet and wrap them up if you will arrange for pickup. Shipping will be up to you though. Just don't have time to do much more than palletize them. All prices are plus shipping (unless noted) and reasonable offers are welcome. NEW PRICES Stripped Doors - SOLD Garnish window moldings - SOLD Lower garnish moldings - SOLD Door latches - SOLD - Thanks! Window regulators and channel - SOLD door handles and cranks - SOLD Scott email: [email protected] or give me a call. 702-845-1874 I will take more pictures if you want them. Nothing to hide here. Last edited by scootermcrad; 08-04-2011 at 08:44 AM. Reason: Parting them out

07-08-2011, 11:29 AM	#2
scootermcrad Junior Member Join Date: Oct 2010 Location: Concord, NC Posts: 29	Re: 1931 Slant windshield doors BTTT PM, email, or give me a call...

07-12-2011, 09:20 AM	#3
scootermcrad Junior Member Join Date: Oct 2010 Location: Concord, NC Posts: 29	Re: 1931 Slant windshield doors BTTT Make me a reasonable offer. If you only need part of the doors to restore a section I can remove and send just that section/part. I will disassemble these, whatever you guys need. Shipping them as a complete door is just going to be too difficult with my time limitations. I WILL help arrange a pickup or put them on a pallet though. THANKS!

07-15-2011, 09:41 AM	#4
scootermcrad Junior Member Join Date: Oct 2010 Location: Concord, NC Posts: 29	Re: 1931 Slant windshield doors Okay! Going to part these out. Send me an email, PM, or call me with your requests. I would prefer to sell components in pairs. (i.E. latches, regulators, garnish moldings, etc.) Worst case I will sell individual pieces if pairs don't sell. I will post new pictures in a new thread once the doors are taken apart. THANKS and BTTT

08-01-2011, 12:08 PM	#5
scootermcrad Junior Member Join Date: Oct 2010 Location: Concord, NC Posts: 29	Re: 1931 Slant windshield doors and components Sponsored Links (Register now to hide all advertisements) Regulators are still available! Everything else is sold! Thanks guys!