The Ford Barn

Roger W Gerow · 03-13-2025, 12:08 PM

There is a right way and a wrong way to do this. At one time I was in possession of the instructions. Guess what! Anyone out there with HELP. Something with compressing the spring to install the pin.
Thanks, Roger

Karl Wolf · 03-13-2025, 12:55 PM

Make sure you do not extend the starter drive. People seem to have a compulsion to do this. There is a way to get it to retract, I don't remember well enough to explain.
Look at channel locks to compress spring- maybe. I don't remember it being that hard.

Karl

Roger W Gerow · 03-13-2025, 04:36 PM

Thanks, Karl

Bob C · 03-13-2025, 06:17 PM

Sponsored Links (Register now to hide all advertisements)

This link may help. https://www.snydersantiqueauto.com/c.../A-11350-M.pdf

03-13-2025, 12:08 PM	#1
Roger W Gerow Senior Member Join Date: May 2010 Location: Walla Walla, Washington Posts: 194	Installing Starter Drive There is a right way and a wrong way to do this. At one time I was in possession of the instructions. Guess what! Anyone out there with HELP. Something with compressing the spring to install the pin. Thanks, Roger __________________ DD658

03-13-2025, 12:55 PM	#2
Karl Wolf Senior Member Join Date: May 2010 Location: Mill Valley,Ca. Posts: 1,539	Re: Installing Starter Drive Make sure you do not extend the starter drive. People seem to have a compulsion to do this. There is a way to get it to retract, I don't remember well enough to explain. Look at channel locks to compress spring- maybe. I don't remember it being that hard. Karl

03-13-2025, 04:36 PM	#3
Roger W Gerow Senior Member Join Date: May 2010 Location: Walla Walla, Washington Posts: 194	Re: Installing Starter Drive Thanks, Karl __________________ DD658

03-13-2025, 06:17 PM	#4
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 9,356	Re: Installing Starter Drive Sponsored Links (Register now to hide all advertisements) This link may help. https://www.snydersantiqueauto.com/c.../A-11350-M.pdf