|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-08-2010, 06:11 PM | #1 |
BANNED
Join Date: May 2010
Posts: 116
|
http://www.fordgarage.com
Last edited by forever4; 09-03-2016 at 04:16 PM. |
05-08-2010, 08:13 PM | #2 |
Senior Member
Join Date: May 2010
Location: Proctorville
Posts: 1,589
|
Re: 1932-34 Model B Four Cylinder Group started!
Great, have a B 32 pickup, thanks for your time and effort, Bruce
|
Sponsored Links (Register now to hide all advertisements) |
|
05-08-2010, 09:22 PM | #3 |
Senior Member
Join Date: May 2010
Location: Toronto, Ontario, Canada
Posts: 1,289
|
Re: 1932-34 Model B Four Cylinder Group started!
Great, I have a 34 B motor that has just came back from the rebuilders, but at the moment does not have a body yet!
|
05-08-2010, 10:10 PM | #4 |
Senior Member
Join Date: May 2010
Location: Suttons Bay, Mich.
Posts: 3,392
|
Re: 1932-34 Model B Four Cylinder Group started!
I would love to have a "B" motor for my model a but after the last year of searching i have come up with nothing.
__________________
Respecting and Resurrecting Ford Model A's. |
05-08-2010, 10:36 PM | #5 |
Junior Member
Join Date: May 2010
Location: Scottsdale Arizona
Posts: 14
|
Re: 1932-34 Model B Four Cylinder Group started!
I have a diamond block (no cracks?) block, a recently ground, drilled & balanced crank, new inserted rods from Eubanks and trying to figure out what to do next. Have'nt worked out the thrust yet, interested in what others have done.
Frank |
05-09-2010, 12:40 AM | #6 |
Senior Member
Join Date: May 2010
Location: ACT Australia
Posts: 507
|
Re: 1932-34 Model B Four Cylinder Group started!
Sponsored Links (Register now to hide all advertisements)
Years ago there used to be a B model forum on one of the Yahoo Groups. Always interested in Canadian A's, B's and C's. Manuel in Oz |
05-09-2010, 12:55 AM | #7 |
Senior Member
Join Date: May 2010
Posts: 374
|
Re: 1932-34 Model B Four Cylinder Group started!
You might call Bert's in Denver. I got one of mine there.
|
05-09-2010, 02:31 AM | #8 |
Senior Member
|
Re: 1932-34 Model B Four Cylinder Group started!
Don't get me wrong, I did read every post, but is not the reason for the disscussion group to move the specific dissussion there?
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
05-09-2010, 04:46 AM | #9 |
Senior Member
Join Date: May 2010
Location: Ridgefield, Ct
Posts: 3,443
|
Re: 1932-34 Model B Four Cylinder Group started!
Count me in, there is a B in Dad's old 1931 Roadster with a Cyclone head. Are Overhead Valve heads part of this group as well? Bob
|
05-09-2010, 07:03 AM | #10 |
Senior Member
Join Date: May 2010
Location: Columbus, IN
Posts: 158
|
Re: 1932-34 Model B Four Cylinder Group started!
I have a B in my Worthington tractor.
|
05-09-2010, 08:49 AM | #11 |
Senior Member
Join Date: May 2010
Location: Toronto, Ontario, Canada
Posts: 1,289
|
Re: 1932-34 Model B Four Cylinder Group started!
Yes, Ted did it for me. It might be a while before I get it up and running, but everything looks great, and as promised with no surprises. Great person to deal with, and kept me updated every step of the way! What a great setup he's got at his new place in Beamsville.
|
05-09-2010, 10:00 AM | #12 |
Senior Member
Join Date: May 2010
Location: Windy City
Posts: 2,919
|
Re: 1932-34 Model B Four Cylinder Group started!
OK, I went there, clicked subscribe, bookmarked the page. Hopefully the group moderator (Vince) will grant admission to a "brother under the pelt." Hey, I like that admissions idea. We all new of a few jerks on the old F-barn, now there's a way to cull the herd?
Anyway, I've got three B engines, all are unfinished works in progress, like just about everything I have. One is a freshly machined .100 over block that I got years ago from Flanegan in Arizona. Remember his "Miracle" engines? It's a miracle that a posse with a rope didn't get to him before he disappeared. Fortunately, the machining dimensions on mine check out, and it is a 'miracle' that he didn't take a shave off the pan rail plane like he did on so many A blocks. I'm waiting to see Rich Falluca's (Antique Engine Rebuilding, Skokie IL) new forged B rods, due this summer. Engine #2 is a very clean complete diamond block non-counterweighted runner with a knock (babbitt?/ haven't looked yet). I whacked it into the wall last week pushing it on a furniture dolly and busted the original front pulley. Maybe that was a good thing? Still pissed. #3 is probably a boat-anchor. I don't know, the deck is badly pitted and the pistons are all stuck. For $100 I couldn't say no. Parts donor, maybe. One will get a Yapp/Riley I have sitting in the box, The other will get one of the two Brumfield "Super" heads (blueprinted, polished 117cc) I had Larry make for me several years ago. I have a small collection of B engine parts; rods, cranks, pans, dizzy's. Probably all junk, we'll see. |
05-09-2010, 10:22 AM | #13 |
BANNED
Join Date: May 2010
Location: Gothenburg Nebraska Just off I-80
Posts: 4,893
|
Re: 1932-34 Model B Four Cylinder Group started!
Vince Looks like you have the fastest growing group on the barn. Rod
|
05-09-2010, 11:03 AM | #14 |
BANNED
Join Date: May 2010
Location: stratford,ct
Posts: 5,971
|
Re: 1932-34 Model B Four Cylinder Group started!
Anybody need a rebuilt fuel pump for a "B" have 2 in stock. ken ct. igadore@sbcglobal. net $150 ea with core exchange. 1-203-260-5945 cell Wrong price $ 110 exchange w/ $16 shipping.
Last edited by ken ct; 01-20-2014 at 05:11 PM. |
05-11-2010, 11:21 AM | #15 |
Junior Member
Join Date: May 2010
Posts: 9
|
Re: 1932-34 Model B Four Cylinder Group started!
Thanks Vince! I subscribed but am not sure it went through to count me in. I have a B in my '29 Fordor, counter balanced, cross drilled for Dan Price's full oil pressure, pistons measuring .043 with four oil rings, an original Cyclone HC head, V-8 clutch, FS ignition, 3.54 gears and looking to improve some more (B intake with B carb).
My speedster project is a B, counter balanced, cross drilled for Dan Price's full oil pressure, one of Dan Price's last Thomas HC heads, headers, V-8 clutch, FS ignition, V-8 Trans (in the works) with 2 International truck hood body, '29 honey comb radiator, +. It has an Isky cam #590, .390 lift [email protected] duration and I know nothing about how it will perform. Can anyone clue me in on it? Thanks! Tom Sieffert Last edited by Tom Sieffert; 05-11-2010 at 11:27 AM. |
05-11-2010, 03:07 PM | #16 |
Senior Member
Join Date: May 2010
Location: Fresno, Ca.
Posts: 3,636
|
Re: 1932-34 Model B Four Cylinder Group started!
Tom...That's close to an ISKY 400 Jr. It's going to be lope, mid & top end cam, good in a LITE car, run large diameter lifters, B's or larger. Dudley
|
05-12-2010, 10:54 AM | #17 |
Junior Member
Join Date: May 2010
Posts: 9
|
Re: 1932-34 Model B Four Cylinder Group started!
@Dudley,
Thanks! I got it all buttoned up but it has adjustable Chrysler tappets, big 1.680 intake valves, 1.580 exhaust, new springs, bronze guides and steel retainers with intake ports opened up to 1.625 and aluminum cam gear. It will be going in a boattail speedster (no fenders, Model T runabout running boards, no doors, minimal windshield glass, two bucket seats, only top hood section) - should be light enough! I want it to 'shake' at idle! Thanks! Tom |
05-24-2010, 07:48 PM | #18 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: 1932-34 Model B Four Cylinder Group started!
|
05-24-2010, 10:10 PM | #19 |
Senior Member
Join Date: May 2010
Location: Owen Sound Ont. Canada
Posts: 198
|
Re: 1932-34 Model B Four Cylinder Group started!
Vince I am interested in any B motor information etc running 2 B engines one in a tudor and one in a 30 Roadster both are counterbalanced an F/S ignition.
Gord. B by the Bay Owen Sound ontario Canada |
05-24-2010, 10:24 PM | #20 |
Senior Member
Join Date: May 2010
Location: Westlake Village, CA
Posts: 477
|
Re: 1932-34 Model B Four Cylinder Group started!
Wow, what fun! I run a B in my '31 and enjoy the extra HP. I am needing a new intake if anyone has an extra. Mine has been welded a few too many times by someone.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|