46 SD tube shocks interference

[Fairlane514]

Rich....I tried your suggestion, the welded pad doesnt sit on top of the wishbone, its just off to the side......also places the lower shock bolt hole further back, shock wont reach.....

[Fairlane514]

Ok.......see if Y'all agree

I think the lower mounts are aftermarket perch bolts that were cut off.

Hopefully the pictures show the "serrations" I think were done by a cut off wheel.

My shocks measure about 14 1/2 from center to center......maybe too short and someone made them work with lower mounts they cut off.......people do weird shit

[Fairlane514]

Flipped the sway bar end links.....I assume its in the correct position now.

Gives me room for a shock to clear everything. Will require about an 18 inch shock, which I think is correct.....

Was thinking the frame mount may need to slant rearward, I could swap sides, left to right