46 Super Deluxe track bar bent?

[Graeme / New Zealand]

Originally Posted by Bruce_MO

I think your track bar is mounted upside down and backwards. The sharp kinked end goes to the pass side. I’ve seen some that are pretty straight after the kink near the end, and others have a slight bend. Mine on my ‘46 Merc has a bit of a bend, but not nearly as much as yours. If you PM me, I can send a couple photos

While we are this subject here's my conundrum. My one is right hand drive. should my track bar be the same way around as a LHD vehicle or should mine be reversed so the kink is on the other side?

GB