Stainless Exhaust Failure

[CT Jack]

I am just guessing but Aries might be welding with a mild steel welding wire and if so the weld joint would have poor corrosion resistance.

[oldspert]

It would not be correct but, couldn't a modern clamp with the rubber between the pipe clamp and the frame be used?
Ed

[dave in australia]

Originally Posted by oldspert

It would not be correct but, couldn't a modern clamp with the rubber between the pipe clamp and the frame be used?
Ed

Did something similar on my dads A. I made a loop out of insertion rubber and used a pipe clamp with a tab. I works until we can get an aries and set it up with the original clamp.