|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-24-2024, 06:47 AM | #1 |
Junior Member
Join Date: Jun 2010
Posts: 9
|
Vicky front seats
I"am stll loooking for 1931 Vicky front seats??? 330-277-7939
|
05-24-2024, 07:41 AM | #2 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,532
|
Re: Vicky front seats
If you are a member of the Victoria Association, you can place an ad in The Bustle. Contact Editor Dean Larson at [email protected].
__________________
Bob Bidonde |
Sponsored Links (Register now to hide all advertisements) |
|
05-24-2024, 02:55 PM | #3 |
Senior Member
Join Date: Apr 2011
Location: Milpitas, CA
Posts: 405
|
Re: Vicky front seats
There are 2 different front seats for a Victoria. From the beginning of production to mid June, the seats used a pivot rod to attach the seats to the floor. After mid June, the drivers seat would slide back and forth. The passenger seat had 2 fixed pivot. The seat back construction is also different between the two. The Victoria drivers seat is 1" wider than the passenger seat. They are different from a 2 door seat.
__________________
Bill Cilker, Jr Unrestored 190A Victoria 45B, 160B & 189A Victoria Association President |
05-24-2024, 03:57 PM | #4 |
Senior Member
Join Date: Jan 2020
Location: SF Bay Area
Posts: 1,183
|
Re: Vicky front seats
There was an article in The Restorer a few months back about a guy who was reproducing them.
__________________
JayJay San Francisco Bay Area ------------------------ 1930 Murray Town Sedan 1931 Briggs S/W Town Sedan |
05-24-2024, 09:31 PM | #5 |
Member
Join Date: Feb 2019
Location: Estes park Colorado
Posts: 54
|
Re: Vicky front seats
I saw some on Snyder’s or Brattons.. they are pricey!
|
05-25-2024, 06:43 AM | #6 |
Senior Member
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,849
|
Re: Vicky front seats
Sponsored Links (Register now to hide all advertisements)
Ive owned both, but dont recall...... |
05-25-2024, 07:15 AM | #7 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,395
|
Re: Vicky front seats
Ronn
Completely different shape and structure Vic has “hour glass” curved back with lower flap Tudor straight back… No where close Someone will likely post pics or easily seen in model a pics everywhere |
05-25-2024, 08:31 AM | #8 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,532
|
Re: Vicky front seats
These are the seats in my Steel-back Victoria. The middle picture is the driver's seat, and the right picture is the passenger's seat.
__________________
Bob Bidonde |
05-25-2024, 09:10 AM | #9 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,395
|
Re: Vicky front seats
Bobs pics are early seats. Are you looking for early or late? The later has the wider drivers seat and the slide setup for the drivers side. The passenger side is same floor setup. And, they don’t have the loose flap but upholster down to the bottom cushion. Kinda hard to explain in words
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|