32-34 Truck Map Pocket

[Krylon32]

Anyone have a good picture of the 32-34 truck map pocket that was on the right kick panel? Le Barron used to show them in their catalogue but I don't know if anyone is doing them currently. I am helping a friend gather parts for his 32 BB short wheelbase stake bed.

[Tim Ayers]

Is this a folded and angled sheet metal thing? If so, I think I have one on my garage and can get pictures later this afternoon.

[Bob C]

This is for AA, may be the same.
https://www.snydersantiqueauto.com/s...ispatch+pocket

[Tim Ayers]

The one I have is similar to what Bob C has. I was told it came from a '34 truck.

[petehoovie]

Originally Posted by Bob C

This is for AA, may be the same.
https://www.snydersantiqueauto.com/s...ispatch+pocket

[Krylon32]

Sponsored Links (Register now to hide all advertisements)

Thanks guys. Got one on the way. Mack Hils.

[Flathead Fever]

I have a basket case '34 firetruck hose tender that still has its original map pouch in it. It looks basically centered from front to back on the kick panel. The bottom rivet (closest to the door) is 8 5/8" from the metal floor edge of the cab to the center of the rivet. The top rivet (the one closest to the door is 12 1/2" from the floor to the center of the rivet. I'd send a photo, but I had a stroke, and I can't get pictures out of my phone yet. I can email them; I just can't get them to go to my computer. There are screws holding the kick panel on. The fourth screw from the bottom of the kick panel lines up with the top corner of the box (not the rivet hole). Judging by the screws holding the kick panel on that AA photo posted, my '34 is mounted just a little bit higher approximately 1/2"??? I'd say from inside corner of the top bend it's a straight line over to the bottom of the of the #4 kick panel screw.