37 coupe RTS T-170 swap!

[joel]

The Maveric above looks like a good choice .
I looked at trimming the torque box up to clear the tail shaft and keep the wishbone mount. I didn't like what I saw so I removed it completely and used a CE replacement kit. I still had some fab to do. Here are some pix of the top half of the wishbone ball socket that I made.

[petehoovie]

Originally Posted by joel

The Maveric above looks like a good choice .
I looked at trimming the torque box up to clear the tail shaft and keep the wishbone mount. I didn't like what I saw so I removed it completely and used a CE replacement kit. I still had some fab to do. Here are some pix of the top half of the wishbone ball socket that I made.