Set of 4 shocks and arms need info

[JM 35 Sedan]

Originally Posted by kimeccles

Thanks for identifying these. I see now the arms are bent for the Model A fit. Are the shock bodies of any value for 1940 collector? Two were tested and adjusted to a Model A spec. for damping.

Kimeccles, I think those shock bodies could be of value to someone trying to do a correct restoration. Someone like Andy Falandes in Massachusetts,who rebuilds these type of shocks would be one of your best source of informative on the questions you are asking here..... in my opinion.

This is the contact info I have for him in my files:
Andrew "Andy" Falandes, EFV8 Shock Rebuilding,
Phone: (413) 768 8487
Email: [email protected]
789 Tea St
Charlemont, MA 01339

[kimeccles]

Thanks for the info.

[Kube]

Originally Posted by JM 35 Sedan

Kimeccles, I think those shock bodies could be of value to someone trying to do a correct restoration. Someone like Andy Falandes in Massachusetts,who rebuilds these type of shocks would be one of your best source of informative on the questions you are asking here..... in my opinion.

This is the contact info I have for him in my files:
Andrew "Andy" Falandes, EFV8 Shock Rebuilding,
Phone: (413) 768 8487
Email: [email protected]
789 Tea St
Charlemont, MA 01339

Only if they are 2 7/8" diameter bodies. If they are 3 1/4", nearly worthless.

I had recently sold a pair of NOF front shocks, concourse correct, in the boxes for $250.
This stuff is losing value seemingly by the day.
And, how many guys are doing proper restorations these days?