![]() |
#21 |
Member
Join Date: Nov 2018
Location: Kansas City
Posts: 64
|
![]()
Deleted my rant but cannot disagree... even though I'm not sure exactly why you say this.
|
![]() |
![]() |
![]() |
#22 |
Senior Member
Join Date: Aug 2011
Location: Millbrae, CA
Posts: 511
|
![]()
Don’t know if this helps, but I had a similar concern about 30 years back. What I built for my closed cab pickup will not meet any particular safety standards, but I felt it made significant strengthening to the B pillar area and gave me a mounting point for a shoulder harness. It is simply a thick wall 3/4” rectangular tubing going up near the B pillar and crossing over to the other side. The tubing is attached midway to the B pillar with a strap and bolt. In my case, it was painted black body color and does not stand out excessively.
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#23 | |
Senior Member
Join Date: May 2010
Location: VA
Posts: 1,454
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#24 |
Member
Join Date: Nov 2018
Location: Kansas City
Posts: 64
|
![]()
Did it work?
|
![]() |
![]() |
![]() |
#25 |
Senior Member
Join Date: Sep 2022
Location: Canton, Michigan
Posts: 155
|
![]()
hahaha
__________________
--------------------------------------- 1929 Model A Tudor "Stay away from negative people, they have a problem for every solution" Model A Ford Club of America Model A Restorers Club Motor City A's Club |
![]() |
![]() |
![]() |
#26 |
Senior Member
Join Date: Aug 2011
Location: Millbrae, CA
Posts: 511
|
![]() Sponsored Links (Register now to hide all advertisements)
![]() ![]() i previously said it was made of 3/4" rectangular tubing, it actually looks more like 1" tubing, maybe 1-1/4" While this is not a sedan, and instead is a pickup, you can see that it blends in reasonably well. As it is my vehicle, not a customer's, I only have to satisfy myself that it provides a higher level of safety than a vehicle with nothing done. |
![]() |
![]() |
![]() |
#27 |
Senior Member
Join Date: May 2010
Location: VA
Posts: 1,454
|
![]()
Very subtle and it blends in well.
|
![]() |
![]() |
![]() |
#28 |
Senior Member
Join Date: Jan 2016
Posts: 2,140
|
![]()
Russ, very nice job!
|
![]() |
![]() |
![]() |
#29 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,550
|
![]()
Many states require youngsters be strapped into an approved safety seat situated in the back seat of a car. i think at least 2 or maybe 3 of these seats could be mounted in a Model "A" Tudor.
![]()
__________________
Bob Bidonde |
![]() |
![]() |
![]() |
#30 |
Junior Member
Join Date: Dec 2021
Posts: 9
|
![]()
Good Work, Ross!
|
![]() |
![]() |
![]() |
#31 | |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,565
|
![]() Quote:
Even though my installation is not approved (which is a requirement to be legal), I am 110% confident that I am waaaay better off than having nothing at all (which is legal). Go figure!
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|