Potvin Cam

[Tim Ayers]

Originally Posted by Ken/Alabama

Anyone have any specs on a Potvin 3/8 cam. ? Is it too much for a 8BA bored to 3 5/16 with a 3 3/4” stroke. ?

Ken:

I can get you the specs tomorrow, but I run a Potvin 3/8ths cam in my 292 ci motor in an AV8 roadster. I absolute love this cam. It has great low down torque and will break the tires loose in 2nd if you floor it. Great power all through the RPM range. I am also running a Weber flywheel and the motor whapps at the crack of the throttle.

Pete would know best, but I've read that this cam like 276 ci or more.