|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Nov 2022
Location: Near Pittsburgh
Posts: 129
|
![]()
I'm piecing together a sport coupe.
My subrails were torch cut in the front, so I need to make some repairs. If you have one of these cars, can you measure the door opening? Distance between the A and B pillars. At the sill, and maybe at the latch? Thanks |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Lakeville, MN
Posts: 5,297
|
![]()
I have a 28 special coupe that is identical to all 29 coupes as far as the door openings are concerned. The measurement from the A pillar to the B pillar at the bottom is 27 1/2". The measurement just above the latch pocket is 28 1/16". Hope this helps.
Rusty Nelson |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: Nov 2022
Location: Near Pittsburgh
Posts: 129
|
![]() Sponsored Links (Register now to hide all advertisements)
I'll have to try and cobble it all together and see if I can hang the doors.. |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|