|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Join Date: Dec 2023
Posts: 5
|
![]()
Hi,I'm new here,I was hoping someone could give me the dimensions of.the 3 upright pieces of wood behind the seat back on a 30/31 pickup cab.it looks like they dont sell them separately and.i dont need a.whole wood kit. Thanks for any help. Dave
Last edited by Adaved; 12-07-2023 at 07:14 PM. Reason: Add more details |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,174
|
![]()
Welcome to Ford Barn. These folks maybe able to help out or someone else may check in
__________________
www.whidbeymodelaclub.com Last edited by Gary WA; 12-30-2023 at 02:34 PM. |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Posts: 1,264
|
![]()
Adaved FIRST, WELCOME to the Ford Barn!
In looking at Gary WA's post is #7 on his illustration the piece you need measurements. I won't be able to measure it until early evening if the above is correct?
__________________
I don't care if the "A" Starts BUT sure WANT IT TO STOP! |
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Dec 2023
Posts: 5
|
![]()
Yes. Its # 7
Thankyou |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Posts: 1,264
|
![]()
Adaved Sorry for taking so long but the BOSS had me on assignment yesterday!
The piece is 22 1/2" long X 1 3/4" wide X 3/4" thick. At the TOP/BACK of each piece is a taper which begins 1/2" from the front down 1 3/4" to the very back of each piece. Hope I have explained myself for you to understand.
__________________
I don't care if the "A" Starts BUT sure WANT IT TO STOP! |
![]() |
![]() |
![]() |
#6 |
Junior Member
Join Date: Dec 2023
Posts: 5
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|