The Ford Barn

B-O-B · 09-07-2023, 10:47 PM

Years ago I bought a Rotary 4 post with a catwalk. The shop that I built has 12' eves & I installed 2' of Plexiglas panels for more light. I bought the lift & picked it up from the dealer with my flatbed car hauler. I used the cherry picker & floor jack to unload & put it together & mount it on the 5'slab.I ran the 220 V \& airline overhead using a drop at one of the post. I had it until I sold-out & gave the new owner a very nice present. Probably had it for 20 some years without a problem.

09-07-2023, 10:47 PM	#32
B-O-B Senior Member Join Date: May 2010 Location: Ft Mohave,Az Posts: 2,011	Re: 4 Post car lift Years ago I bought a Rotary 4 post with a catwalk. The shop that I built has 12' eves & I installed 2' of Plexiglas panels for more light. I bought the lift & picked it up from the dealer with my flatbed car hauler. I used the cherry picker & floor jack to unload & put it together & mount it on the 5'slab.I ran the 220 V \& airline overhead using a drop at one of the post. I had it until I sold-out & gave the new owner a very nice present. Probably had it for 20 some years without a problem.