Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-06-2023, 02:09 PM   #1
MilwaukeeMike
Member
 
MilwaukeeMike's Avatar
 
Join Date: Apr 2023
Posts: 40
Default Re: Engine rust

One cheap way to de-gunk an engine is to run distilled water in it. Fill it and run it for a little while. Maybe a day or two. Drain and repeat. The water is mineral free and helps leach out a lot of junk. I used a couple cases until it stayed clear. Then change it with your 50/50 mix. Don't leave distilled water in there for long.
MilwaukeeMike is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:33 AM.