KR Wilson distributor fixture V-126

[SoCalCoupe]

Originally Posted by hb32

So I must be missing something. I put a crab style distributor in it but it doesn’t seem to go down far enough to meet the, for lack of a better description, the wheel that turns on the fixture.

The 2-hole ring on top is an adapter to the 3-hole timing tool. It requires another adapter to extend the 2-hole shaft to the bottom of the tool. It looks like this. You can go to a similar fixture for sale last year on H.A.M.B. and see the adapter in the kit. The picture is from Speedway motors catalog. I don't know if would work on the KR Wilson tool or not.