"Modern" Shocks from Snyders

[Pete]

Originally Posted by quickchange

Pete, Can you give makes , models, numbers of shocks that would suit mainly the front ones, as we have found the ones dealers sell as a set a bit hard on our roads, thanks,Derek on holiday at speedsters reunion ,

The main thing you need to know to get started is the working installed length for your car.
A good place to start for compression/rebound is 50/50. Try them and see if you like the ride and go from there.
There are so many makes,models and part numbers that you should be able to find something easily.
Remember, read up first and you DO NOT need new ones. Used ones will outlast you.

There is a LOT of midget and sprint car activity down under so you shouldn't have any problem locating some.