|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: May 2010
Posts: 315
|
![]()
I have a valley cover with the provision for a PCV valve. Removed the crankcase breather and made a block-off plate to cover the hole. Now I need the spacer under the carb that has the provision for the vacuum line to the PCV valve. Anybody know where I can get one? This is a 272 with 2 barrel.
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Lancaster, CA
Posts: 917
|
![]() Sponsored Links (Register now to hide all advertisements)
Bear in mind that the company may have other options than the one I found pretty quickly - I think the open chamber would work but would not be as good as a spacer that had the two holes to match the carburetor/intake bores.
__________________
Lancaster, California Visit hotrodreverend.com to view hundreds of pictures and videos of the build of the 1955 Ford Club Sedan! |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|