Reaming Axle Spindle to fit King Pin - The Ford Barn

		The Ford Barn > General Discussion > Model A (1928-31)
Reaming Axle Spindle to fit King Pin

Sponsored Links (Register now to hide all advertisements)

Prev

Previous Post

Next Post

Next

05-27-2023, 03:45 PM	#6
Jim/GA Senior Member Join Date: May 2010 Location: Young Harris, GA Posts: 2,093	Re: Reaming Axle Spindle to fit King Pin Sponsored Links (Register now to hide all advertisements) I ran across the following video about reaming spindle bolt bushings a few days ago and I thought it was very well done. https://youtu.be/q6H9VL22NNc Lots of cutting oil, never turn the reamer in the opposite direction, clean the reamer often, and gently take a second pass through the bushings. This guy does it outdoors on an old picnic table! __________________ Jim Cannon Former MAFCA Technical Director "Have a Model A day!"

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Sponsored Links (Register now to hide all advertisements)

All times are GMT -5. The time now is 10:21 PM.