|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
|
|
03-31-2023, 01:15 PM
|
#1 |
|
Senior Member
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,697
|
Re: 1948 Ford V8 oil pan fit on a 1953?
The early pan will not fit the latter block. There's more to it than the lower bell housing tack welded on. The rear main bearing caps and rear main bearing seal area between the early and late flathead blocks are completely different this means each oil pan has a substantively different rear seal area.
Ronnieroadster
__________________
I use the F word a lot no not that word these words Flathead, Focus and Finish "Life Member of the Bonneville 200 MPH Club using a Ford Flathead block First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 First Ford flathead roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH reset the record in 2024 to 211.830 running to mile four. Top speed 2024 mile five 220.672 exit speed 221.587 |
|
|
|
«
Previous Thread
|
Next Thread
»
Hybrid Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 10:14 AM.