|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
|
|
#11 |
|
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 11,916
|
Don't add air ride to a 40 Ford as you will destroy it. In order to lower a 40 Ford 6 in. you will need to install a complete Heidts frame for about $9K.
Read this: https://www.fordbarn.com/forum/showt...1367&showall=1 The one below still has the stock frame and a solid axle. The front chin pan is 4 in. off the ground and the rear could be lowered more if the "rake" was not desired. Still has the stock drive train. Last edited by 19Fordy; 10-27-2022 at 09:02 PM. |
|
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|