Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-29-2022, 04:02 AM   #6
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,184
Default Re: Technical: Electrical- testing for solenoid or starter switch problem

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by phartman View Post
Thinking it was the starter solenoid, I replaced it. When I turn the key now and lift the ignition lever, at first I heard the solenoid click; now it buzzes as soon as I lift the starter lever.

Where should I begin my diagnosis? Bad ignition switch? Bad starter solenoid?
Not sure what my next step should be?
There are quite a few DIFFERENT solenoids available. The one you want will be electrically wired as below.




Something like this Cole-Hersee (Click the link BELOW):

https://www.amazon.com/Continuous-Te...762603&sr=8-14




You must also make sure to wire BATT to the proper BIG LUG....it makes a difference!


"BAT" Marking....

__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE
V8COOPMAN is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:43 AM.