|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-28-2022, 10:14 AM | #1 |
Senior Member
Join Date: Mar 2022
Location: Richmond,Virginia
Posts: 136
|
Holes in SS trim
Unfortunately the previous owner fastened some of the stainless steel trim with screws. Anyone have experience with repairing the holes?
|
08-28-2022, 01:54 PM | #2 |
Senior Member
Join Date: May 2010
Location: westbury ny
Posts: 854
|
Re: Holes in SS trim
if you have a tig torch you could weld them also could be done with a mig using ss wire and correct gas sand and polish
|
Sponsored Links (Register now to hide all advertisements) |
|
08-28-2022, 04:51 PM | #3 |
Senior Member
Join Date: May 2010
Location: Liberty, KY
Posts: 915
|
Re: Holes in SS trim
I have fixed them using my Cobra torch and stainless rod.
|
08-28-2022, 06:28 PM | #4 |
Senior Member
Join Date: Mar 2022
Location: Richmond,Virginia
Posts: 136
|
Re: Holes in SS trim
The metal so thin I would be afraid of warpage or burn through if I used a torch. I'll have to find some scrap pieces to practice on. I don't have a tig outfit but I could get some stainless wire for my mig welder.
|
08-28-2022, 07:05 PM | #5 |
Member
Join Date: Oct 2020
Posts: 73
|
Re: Holes in SS trim
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|