The Ford Barn

Gerald cook · 08-21-2022, 11:23 AM

Does anyone need a reference book for these years of ford truck.

miker98038 · 08-21-2022, 11:09 PM

Bump. Kultulz? Nobody you know?

KULTULZ · 08-21-2022, 11:21 PM

I have mine on CD. Kinda gets you spoiled.

Is the catalog bound or loose leaf?

alt63bird · 08-22-2022, 02:27 PM

I'm looking for one - the damn $25 CD I got from Obsolete Ford in OKC a couple of years ago won't load because it's trying to find a website that no longer exists to get the key to unlock it. A friend loaned me a 57-68 truck MPC up through Section 100 but took it back. PM me.

flatrod · 08-23-2022, 09:32 AM

Any interest in the old mico fish that Ford used? I don't have the viewer, which I understand is needed to see them. Plus I have some price sheets from the late 70's, OSI books and other things.

KULTULZ · 08-23-2022, 09:41 AM

Sponsored Links (Register now to hide all advertisements)

Quote:

... OSI books and other things ...

Publication dates on the OSI MANUALS?

What other things?

flatrod · 08-24-2022, 09:37 AM

I will dig them out and get dates. I have not looked at these in over 20 years.

flatrod · 08-24-2022, 09:52 PM

OSI dates..
July 1979 and January 1980

alt63bird · 08-24-2022, 10:09 PM

Quote:

Originally Posted by flatrod

Any interest in the old mico fish that Ford used? I don't have the viewer, which I understand is needed to see them. Plus I have some price sheets from the late 70's, OSI books and other things.

I don't know if the microfiche viewer I have for Sherwin-Williams paint microfiches would work but I'm guessing they're similar size. Might be worth a gamble to try and see if they work?

flatrod · 08-25-2022, 09:29 AM

Most viewers I tried show about 10 or 20 pages at the same time, too small to read. I don't think I have your address still, Alan, PM me and I will send a few to see if they work.

KULTULZ · 08-25-2022, 11:15 AM

The FORD viewer shows one page at a time.

I used to have one for regular viewing and one that could print the page.

Then I developed this huge brain fart that told me (in an inner voice) to can them as I would not ever need them again. I got rid of them and slides that went back years most of them early print dates (box fulls).

Yes, the boy has problems ...

flatrod · 08-25-2022, 12:49 PM

I had a Ford viewer but didn't have room for it and really never used it, so it got tossed out, but I kept stacks of slides.

alt63bird · 08-27-2022, 12:55 PM

Flatrod: PM sent.

flatrod · 09-01-2022, 08:55 AM

Alt63bird, I did not get your PM

alt63bird · 09-02-2022, 01:31 PM

Flatrod: got your pm from Monday and responded with address.
Gerald: Are you trying to find a home for the 64-72 truck MPC? I am interested in the set.

08-21-2022, 11:23 AM	#1
Gerald cook Member Join Date: Jan 2014 Posts: 45	Ford master parts book 64-72 Does anyone need a reference book for these years of ford truck.

08-21-2022, 11:09 PM	#2
miker98038 Senior Member Join Date: Mar 2013 Location: Kent, WA. Tucson, AZ Posts: 1,625	Re: Ford master parts book 64-72 Bump. Kultulz? Nobody you know?

08-21-2022, 11:21 PM	#3
KULTULZ Senior Member Join Date: Aug 2012 Location: IN A GALAXIE FAR, FAR AWAY Posts: 7,386	Re: Ford master parts book 64-72 I have mine on CD. Kinda gets you spoiled. Is the catalog bound or loose leaf? __________________ ***** "Last Sunday, I caught him makin' eyes at Idell Bushey durin' preachin'. And I know what they do up there in the hills when they say they're possum huntin'. They're just sittin' around the campfire, drinkin' hard cider, hittin' each other on the shoulder and hollerin' 'flinch!'." ― Charlene Darling (Daughter of Briscoe Darling)

08-22-2022, 02:27 PM	#4
alt63bird Senior Member Join Date: Feb 2011 Location: outside Omaha, NE Posts: 281	Re: Ford master parts book 64-72 I'm looking for one - the damn $25 CD I got from Obsolete Ford in OKC a couple of years ago won't load because it's trying to find a website that no longer exists to get the key to unlock it. A friend loaned me a 57-68 truck MPC up through Section 100 but took it back. PM me. __________________ Alan H. Tast AIA, LEED AP BD+C Technical Director/Past President-Editor-Publications Director, Vintage Thunderbird Club Int'l. (VTCI) http://www.vintagethunderbirdclub.net Author, "Thunderbird 1955-1966" & "Thunderbird 50 Years" 35+ year member, Crown Victoria Ass'n.

08-23-2022, 09:32 AM	#5
flatrod Senior Member Join Date: Dec 2012 Location: Anchorage Alaska Posts: 308	Re: Ford master parts book 64-72 Any interest in the old mico fish that Ford used? I don't have the viewer, which I understand is needed to see them. Plus I have some price sheets from the late 70's, OSI books and other things.

08-24-2022, 09:37 AM	#7
flatrod Senior Member Join Date: Dec 2012 Location: Anchorage Alaska Posts: 308	Re: Ford master parts book 64-72 I will dig them out and get dates. I have not looked at these in over 20 years.

08-24-2022, 09:52 PM	#8
flatrod Senior Member Join Date: Dec 2012 Location: Anchorage Alaska Posts: 308	Re: Ford master parts book 64-72 OSI dates.. July 1979 and January 1980

08-25-2022, 09:29 AM	#10
flatrod Senior Member Join Date: Dec 2012 Location: Anchorage Alaska Posts: 308	Re: Ford master parts book 64-72 Most viewers I tried show about 10 or 20 pages at the same time, too small to read. I don't think I have your address still, Alan, PM me and I will send a few to see if they work.

08-25-2022, 11:15 AM	#11
KULTULZ Senior Member Join Date: Aug 2012 Location: IN A GALAXIE FAR, FAR AWAY Posts: 7,386	Re: Ford master parts book 64-72 The FORD viewer shows one page at a time. I used to have one for regular viewing and one that could print the page. Then I developed this huge brain fart that told me (in an inner voice) to can them as I would not ever need them again. I got rid of them and slides that went back years most of them early print dates (box fulls). Yes, the boy has problems ... __________________ ***** "Last Sunday, I caught him makin' eyes at Idell Bushey durin' preachin'. And I know what they do up there in the hills when they say they're possum huntin'. They're just sittin' around the campfire, drinkin' hard cider, hittin' each other on the shoulder and hollerin' 'flinch!'." ― Charlene Darling (Daughter of Briscoe Darling) Last edited by KULTULZ; 08-25-2022 at 05:04 PM. Reason: CRS - DISJOINTED SENTENCES

08-25-2022, 12:49 PM	#12
flatrod Senior Member Join Date: Dec 2012 Location: Anchorage Alaska Posts: 308	Re: Ford master parts book 64-72 I had a Ford viewer but didn't have room for it and really never used it, so it got tossed out, but I kept stacks of slides.

08-27-2022, 12:55 PM	#13
alt63bird Senior Member Join Date: Feb 2011 Location: outside Omaha, NE Posts: 281	Re: Ford master parts book 64-72 Flatrod: PM sent. __________________ Alan H. Tast AIA, LEED AP BD+C Technical Director/Past President-Editor-Publications Director, Vintage Thunderbird Club Int'l. (VTCI) http://www.vintagethunderbirdclub.net Author, "Thunderbird 1955-1966" & "Thunderbird 50 Years" 35+ year member, Crown Victoria Ass'n.

09-01-2022, 08:55 AM	#14
flatrod Senior Member Join Date: Dec 2012 Location: Anchorage Alaska Posts: 308	Re: Ford master parts book 64-72 Alt63bird, I did not get your PM

09-02-2022, 01:31 PM	#15
alt63bird Senior Member Join Date: Feb 2011 Location: outside Omaha, NE Posts: 281	Re: Ford master parts book 64-72 Flatrod: got your pm from Monday and responded with address. Gerald: Are you trying to find a home for the 64-72 truck MPC? I am interested in the set. __________________ Alan H. Tast AIA, LEED AP BD+C Technical Director/Past President-Editor-Publications Director, Vintage Thunderbird Club Int'l. (VTCI) http://www.vintagethunderbirdclub.net Author, "Thunderbird 1955-1966" & "Thunderbird 50 Years" 35+ year member, Crown Victoria Ass'n.