|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#41 |
Senior Member
Join Date: Jun 2012
Location: Gaylord, Michigan
Posts: 1,628
![]() |
![]()
SoCal……my wipers work pretty good but I may look to see if there’s a vac leak. I’ve got some rubber caps that I’ll try. It only stumbles a little bit now after it’s warmed up. Cruises great and idles great, but it’s when in 1st gear and 2nd gear during acceleration that it stumbles.
Thx for the tip ! |
![]() |
![]() |
![]() |
#42 |
Senior Member
Join Date: Jun 2012
Location: Gaylord, Michigan
Posts: 1,628
![]() |
![]()
SoCal……
Bingo……..the vacuum line into the intake manifold was very loose ! I tightened it up at distributor base again and also at the manifold and it seems to have resolved my stumbling problems ! Thx….. Mike |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#43 |
Senior Member
Join Date: Sep 2021
Location: Point Loma, San Diego, CA
Posts: 529
|
![]() |
![]() |
![]() |
![]() |
#44 |
Senior Member
Join Date: Jun 2012
Location: Gaylord, Michigan
Posts: 1,628
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|