The Ford Barn

tsbrock · 02-10-2022, 12:32 AM

Does anyone know if the 1933/34 rumble seat hinge BRACKET (the part bolted to the body... not the lid) is the same as the 1935/36 hinge bracket? Are they interchangeable?

aandkt · 02-10-2022, 12:42 AM

Send a picture of where it belongs, I recently did mine in my 36

tsbrock · 02-10-2022, 01:10 AM

Three pictures attached.
1. Shows the location in the rear of 1934 Roadster where the hinge bracket mounts to body
2. Shows the hinge bracket for a 1933-34 rumble seat hinge system

3, Shows the hinge bracket for a 1935-36 rumble seat hinge system

The two brackets for the 1933/34 and 1935/36 look so similar.
Are they interchangeable?

Note: I pulled these pics off internet to illustrate my question... hope that is ok.

petehoovie · 02-10-2022, 01:38 AM

Quote:

Originally Posted by tsbrock

Three pictures attached.
1. Shows the location in the rear of 1934 Roadster where the hinge bracket mounts to body
2. Shows the hinge bracket for a 1933-34 rumble seat hinge system
3, Shows the hinge bracket for a 1935-36 rumble seat hinge system

The two brackets for the 1933/34 and 1935/36 look so similar.
Are they interchangeable?

Note: I pulled these pics off internet to illustrate my question... hope that is ok.

Karl Wescott · 02-10-2022, 11:33 AM

Sponsored Links (Register now to hide all advertisements)

That part (call it a trunnion for lack of better description) is used on 1932 3 Window, and 1933-39 with rumble.

In the past we made them in aluminum. I recently made a half dozen as a test run for a steel rumble hinge kit for the 1932 3 Window, I will be making more but it will be at least 6 months.

02-10-2022, 12:32 AM	#1
tsbrock Junior Member Join Date: Oct 2021 Location: Gilbert AZ Posts: 22	1933/34 and 1935/36 Rumble Hinge Bracket Does anyone know if the 1933/34 rumble seat hinge BRACKET (the part bolted to the body... not the lid) is the same as the 1935/36 hinge bracket? Are they interchangeable?

02-10-2022, 12:42 AM	#2
aandkt Senior Member Join Date: May 2010 Location: LI NY Posts: 223	Re: 1933/34 and 1935/36 Rumble Hinge Bracket Send a picture of where it belongs, I recently did mine in my 36

02-10-2022, 11:33 AM	#5
Karl Wescott Senior Member Join Date: May 2010 Location: Oregon Posts: 1,301	Re: 1933/34 and 1935/36 Rumble Hinge Bracket Sponsored Links (Register now to hide all advertisements) That part (call it a trunnion for lack of better description) is used on 1932 3 Window, and 1933-39 with rumble. In the past we made them in aluminum. I recently made a half dozen as a test run for a steel rumble hinge kit for the 1932 3 Window, I will be making more but it will be at least 6 months.