Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)
Reload this Page solenoid with start button

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-29-2022, 10:36 AM   #6
Big Red 51
Senior Member
 
Big Red 51's Avatar
 
Join Date: May 2010
Location: Central New Jersey
Posts: 134
Default Re: solenoid with start button
Sponsored Links (Register now to hide all advertisements)
Leon, I think the ST 58 is for Negative ground only. ST 53 is the one for Positive ground. I found this out the hard way when NAPA thru the wrong one in the bag when I needed one (ST53) for positive ground on '49 PU. Of course I couldn't return it. The ST58 was made for some small Nash/AMC cars that were 6 Volt. 58 was made in Asia and 53 was made in Mexico with no ST number stamped on them only 6V, back in June 2020.
Don
Last edited by Big Red 51; 02-01-2022 at 04:21 AM. Reason: Typed wrong solenoid number for Echlin solenoid.
Big Red 51 is offline   Reply With Quote
 

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:40 AM.