The Ford Barn

MrBruce · 01-15-2022, 08:14 AM

I don't know if I can paste into this communication, but will try to paste a sheet from Tom Endy on the gas gauge. When you have all the gaskets in place you really need two to three of the brass rings on the large ring. http://Gas-Gauge-Repair.pdf
If this doesn't work search Tom Endy - Gas gauge repair and it might come up

LAV · 01-15-2022, 05:08 PM

Thanks for the new source, I’ll check it out.

updraught · 01-16-2022, 12:15 AM

Quote:

Originally Posted by MrBruce

I don't know if I can paste into this communication, but will try to paste a sheet from Tom Endy on the gas gauge. When you have all the gaskets in place you really need two to three of the brass rings on the large ring. http://Gas-Gauge-Repair.pdf
If this doesn't work search Tom Endy - Gas gauge repair and it might come up

https://www.santaanitaas.org/tom-endys-tech-articles/

01-15-2022, 08:14 AM	#1
MrBruce Senior Member Join Date: Oct 2014 Location: Charlotte, NC Posts: 327	Re: Gas guage outer ring not seating I don't know if I can paste into this communication, but will try to paste a sheet from Tom Endy on the gas gauge. When you have all the gaskets in place you really need two to three of the brass rings on the large ring. http://Gas-Gauge-Repair.pdf If this doesn't work search Tom Endy - Gas gauge repair and it might come up

01-15-2022, 05:08 PM	#2
LAV Member Join Date: Oct 2017 Location: Litchfield Park, AZ Posts: 34	Re: Gas guage outer ring not seating Thanks for the new source, I’ll check it out.