|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-03-2021, 01:24 PM | #1 |
Member
Join Date: Feb 2021
Location: Carson City, Nevada
Posts: 56
|
Headlight problems
The other night I was coming home (1940 Deluxe, 6 volt, positive ground) and the headlights started flickering off and on. The first thing I thought of was a partially broken wire somewhere. I didn't find a broken wire anywhere, but when I pulled out the switch on the dash and turned it on, the headlight wire became hot to the touch. I've got 6.37 volts coming out of the switch to the headlight wire so I assume the switch is good. Do I have a bare spot somewhere grounding to the car? Electrical is not my strong suite. Thanks.
__________________
A Proud Navy Veteran Last edited by o2bnkc; 10-03-2021 at 01:30 PM. |
10-03-2021, 03:11 PM | #2 |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: Headlight problems
Can be something as simple as dirty bad battery post connections.
Everything else you have to trace.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES |
Sponsored Links (Register now to hide all advertisements) |
|
10-03-2021, 04:31 PM | #3 |
Member
Join Date: Feb 2021
Location: Carson City, Nevada
Posts: 56
|
Re: Headlight problems
Now the taillight wire is getting hot. It was smoking the connector by the firewall in the engine compartment When I disconnect it, the headlight wire cools off. With just the parking lights on, the taillights are very bright. With the headlights on, they are pretty dim.
__________________
A Proud Navy Veteran |
10-03-2021, 04:38 PM | #4 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,097
|
Re: Headlight problems
Follow the light wires from the switch all the way to the front and back. Sounds like you have a bare wire touching some metal. If you have an old wire harness it may be time for a new one. '40 has a circuit breaker did you check it to see if it was getting hot?
|
10-03-2021, 06:47 PM | #5 |
Member
Join Date: Feb 2021
Location: Carson City, Nevada
Posts: 56
|
Re: Headlight problems
The current wiring harness was installed in 2012. It seems that both the headlight and taillight wires are overheating when the switch is pulled out. I've traced all the parts of each wire I can see. Where is the circuit breaker?
__________________
A Proud Navy Veteran |
10-03-2021, 07:28 PM | #6 |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: Headlight problems
Sponsored Links (Register now to hide all advertisements)
This shows the location of the circuit breaker.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES |
10-04-2021, 08:47 AM | #7 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,097
|
Re: Headlight problems
The circuit breaker is on the inside of the firewall just above the steering column. Also check your dimmer switch as the problem could be there.
|
10-04-2021, 10:31 AM | #8 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 11,044
|
Re: Headlight problems
Be sure to check all the slip in wire connectors that join the wires together
|
10-04-2021, 11:03 AM | #9 |
Senior Member
Join Date: Jul 2010
Location: 36 miles north of Albany NY
Posts: 2,973
|
Re: Headlight problems
Also make sure you have good grounds everywhere, wire brush, file whatever you need to do to get clean, bright, tight grounds.
|
10-04-2021, 11:16 AM | #10 |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: Headlight problems
And if you clean all the connections, I have had good luck lightly coating the connections with dielectric grease before reassembly to help keep future corrosion from forming.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES Last edited by 51 MERC-CT; 10-04-2021 at 04:19 PM. |
10-04-2021, 04:41 PM | #11 |
Senior Member
Join Date: May 2010
Location: Columbia, SC
Posts: 1,579
|
Re: Headlight problems
|
10-05-2021, 08:27 PM | #12 |
Member
Join Date: Feb 2021
Location: Carson City, Nevada
Posts: 56
|
Re: Headlight problems
Thanks for all the suggestions, guys. I don't see anything obvious yet. My dimmer switch is not even hooked into the wiring and I don't see any bare wires yet. Could the light switch itself, be bad?
__________________
A Proud Navy Veteran |
10-05-2021, 11:10 PM | #13 |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,134
|
Re: Headlight problems
IF your dimmer is not even hooked into the headlight circuit (WHY?), how are you dimming headlights? This is obviously not normal, and indicates that someone has screwed with the system. Any other notable anomalies? DD |
10-06-2021, 09:11 PM | #14 |
Member
Join Date: Feb 2021
Location: Carson City, Nevada
Posts: 56
|
Re: Headlight problems
LOL! I thought you meant the dimmer control on the dashboard lights!! So the foot switch can cause problems?
__________________
A Proud Navy Veteran |
10-06-2021, 09:24 PM | #15 |
Senior Member
Join Date: May 2010
Location: Star, MS
Posts: 4,032
|
Re: Headlight problems
Do you know that a 6V harness was used when it was rewired?
|
10-06-2021, 09:54 PM | #16 |
Member
Join Date: Feb 2021
Location: Carson City, Nevada
Posts: 56
|
Re: Headlight problems
I assume it was. The wire cloth coverings match the same color code as the original wiring according to my shop and owners manual. Red/yellow tracers for the headlights and a black wire for the taillights. I can't find a circuit breaker, though. I hooked up the ignition resister when I first got the car, but isn't the circuit breaker supposed to be up there by it? Can the dash switch be bad? That's the only place where the headlight and taillight wires meet up, and they both get hot.
__________________
A Proud Navy Veteran |
10-06-2021, 11:12 PM | #17 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,685
|
Re: Headlight problems
The original circuit breaker does not resemble a modern unit, but rather, appears as a simple small black box, mounted on the same rectangular fiberboard as the ignition resistor. You said you hooked up the resistor, so I’m wondering if perhaps the resistor is routed incorrectly to the lighting circuit via the circuit breaker?
__________________
Alan |
10-07-2021, 02:49 AM | #18 | |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,134
|
Re: Headlight problems
Quote:
They should be mounted on the same board, similar to this. DD |
|
10-07-2021, 12:16 PM | #19 | |
Senior Member
Join Date: Jun 2014
Location: Williamsburg, VA
Posts: 1,661
|
Re: Headlight problems
Quote:
If the dimmer switch is not connected, it may be that someone wired it so that both the high and low headlight beams come on at the same time. That would double the normal current load through the switch, wiring and circuit breaker, probably causing the circuit breaker to cycle and wires to get hot. |
|
10-07-2021, 08:18 PM | #20 | |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,134
|
Re: Headlight problems
Quote:
He finally explained in post #14 that he was referring to the DASHBOARD LIGHTING dimmer (rheostat). DD . |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|