Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-08-2021, 11:03 AM   #4
bobbader
Senior Member
 
Join Date: May 2010
Location: Huntington, NY
Posts: 352
Default Re: Cleaning Steering Gear Box

The short answer is that you can’t remove the grease inside the box without removing the column and taking the box apart. The longer answer is that your steering box probably needs a total rebuild. AND, the grease inside is probably NOT the reason your steering is hard. It may contribute to the problem, but is not the sole culprit. Aside from that, removing the grease and putting gear lube in will most likely give you problems with that lube leaking out. These steering boxes did not have any real seals from the factory so, no, the seals are not blown out. Most likely you have a “7 tooth” steering box and they were not a good design to begin with and can be tough to rebuild as there are no internal adjustments to take up slack in the system. If you are in a local Model A club, perhaps there’s a knowledgeable person who can help you assess the situation before you get too involved.

Good luck. Bob Bader
bobbader is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:50 AM.