Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-02-2010, 06:01 AM   #26
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Update on Vapor Lock and Changes made with Gas Cap/Sig difference in the 2 caps

Sponsored Links (Register now to hide all advertisements)
Vapor lock vs. vaccum lock!

I too suspect junk plugging the fuel line or jets. The first thing I would do is clean the carb and sediment bowl, remove the fuel line and blow blow through it, remove the shutoff valve and install a fine screen filter. Make sure the fuel line going into the carb doesn't extend more than 1/8" beyond the brass ring.
Tom Wesenberg is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:06 PM.