Speedster Kit

[Sparky]

Originally Posted by Bill O'Brien

Sparky, any new pics with the Windshileds installed?? Lets see some more Speedster pics!

OK, the weather was finally nice enough to take the speedster out! Here are the windshield pics. They are made from 1/4" Lexan. After tweaking a cardboard pattern until I liked the fit, I cut the plastic with a bandsaw, then sanded and polished the edges with a polishing wheel. The brackets were cut from 1/8" aluminum. They work very well; I used to get a direct blast in my face and now the air flows above my head.

The speedster also has a new face. I used to have the headlights mounted lower, and didn't have turn signals. The headlight bar is a stock '29 bar that I cut and welded so it mounts to the frame. The turn signals are Harley cycle lights that I found on eBay.