![]() |
#1 |
Senior Member
Join Date: May 2010
Location: Rocky Mount,MO.
Posts: 410
|
![]()
never done this,powdering tire or tube or both,and how to
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Dec 2013
Location: Mossel Bay, about 300km from Cape Town
Posts: 530
|
![]()
Hi Ford31,
Easy, use talcum or baby powder before installation. Put some powder in your hand and rub it on the tube. The tube is slightly tacky and some powder will stick to it. Put some powder in the tire and rub the insides with your hands, it will also stick to the inside of the tire. Fit the tire and tube as per normal. Inflating the tube just a little, will make the rubbing as well as fitting the tube inside the tire, a easier.
__________________
Regards Chris Cape Town 28 Model A RPU, 29 Chevy Phaeton, 67 E Type FHC, 67 250SL Pagoda, 83 911 SC |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Rocky Mount,MO.
Posts: 410
|
![]()
thanks
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jun 2014
Location: Land of Lincoln
Posts: 3,177
|
![]()
Never to old to learn how to powder a babies butt, lol
__________________
Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Sep 2019
Location: Fort Gratiot, Michigan
Posts: 2,296
|
![]()
Your post(s) tire question answers your question very well.
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,554
|
![]() Sponsored Links (Register now to hide all advertisements)
Folks are used to wearing masks now so that would be a good idea. |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2010
Location: Windy City
Posts: 2,919
|
![]()
FWIW, tires and tubes were originally dusted with powdered mica, not talc! If you look at an old NOS tube you see a somewhat sparkly crystalline appearance to the dusting covering the tube. Talc does not look that way.
Original reason for mica: Completely resistant to water and humidity. It is hydrophobic, and stays dry and slippery despite moisture. Talc, on the other hand, turns gummy and loses its ability to permit the tube to 'slip', relieving stretch tension between the tube, rim, and inner casing of the tire. Back in the late 40's my dad had boxes of the stuff (mica powder) labeled "B.F. Goodrich" at his service station and tire shop. Every time a used tube or tire was removed for service they were brushed with the stuff before reassembly using what looks like a wallpaper paste brush. Now known to cause pulmonary fibrosis if you breathe the dust for a career, the stuff went out of circulation in tire shops 50 years ago. |
![]() |
![]() |
![]() |
#8 | |
Senior Member
Join Date: Jul 2011
Location: Southwestern Connecticut
Posts: 934
|
![]() Quote:
Ken
__________________
Style beats speed any day, and with a lot fewer tickets. |
|
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Jan 2016
Posts: 2,139
|
![]()
Instead of talc I found that spaying water mixed with dish detergent and a bag works best.
I then set the tire changer platform on 4 milk crates and then use 3 HF tire changers. |
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: May 2010
Location: Rocky Mount,MO.
Posts: 410
|
![]()
what about chalk powder,u cant find talc around here,tractor place uses chalk powder
|
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,554
|
![]()
The purpose of dry lube on innertubes is to allow the tube to expand into the tire carcass without wrinkling the tube. Any material that allows that will work. As for one type being any better than another, that's up for debate.
Powdered mica has not been packaged as a tube lube for a long time. It would be even more important to wear a mask with it due to the scarring and possible cancer it can cause in the lungs. Definitely wear a mask if using powdered mica. |
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: Jan 2021
Location: Western NC
Posts: 213
|
![]()
Ok, so I just installed 6 new tires, tubes, and rim liners without doing any of this. No powder, no soap. I put about 5 psi in them and bounced them on the floor half a dozen times to let the tube find its happy place, then aired them up fully. Did I screw up? If there is a problem with what I did, when/what will happen?
__________________
1930 Standard Coupe |
![]() |
![]() |
![]() |
#13 | |
Senior Member
Join Date: May 2010
Location: PASADENA, CA
Posts: 1,895
|
![]() Quote:
My opinion, Chris W. Last edited by CWPASADENA; 03-25-2021 at 10:09 PM. Reason: TYPO |
|
![]() |
![]() |
![]() |
#14 |
Senior Member
Join Date: May 2010
Location: Rocky Mount,MO.
Posts: 410
|
![]()
back to powdering tires,i cut 1x4 blocks 5 inches long used 1x 4 to keep tire open,while coating inside tire with powder,pumped tube a bit powdered tube also just used hands took out blocks put tube in put wheel liners in mounted tires with wheels on truck was easier than i thought thanks for the help
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|