|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
|
|
02-04-2021, 04:44 PM
|
#1 |
|
Senior Member
Join Date: Jul 2014
Location: Fairbanks, Alaska
Posts: 126
|
Re: Crank shaft pulley wobbles
I agree with Syncro, if it's been running that way quite a while and it's not loose or leaking, leave it alone. It's only job is to drive a big soft V belt and the belt doesn't care. If the engine has a stock Model A crank, balance is not an issue as nothing is balanced anyway.
If the engine was out for some reason, I'd probably fix the runout, but otherwise it seems like a lot of work for no real improvement.
__________________
I still have an excellent rememberer, trouble is my forgetter is so much better that it often overrides the rememberer. |
|
|
|
«
Previous Thread
|
Next Thread
»
Hybrid Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 05:42 AM.